Lock Installation
Certified Expert Service

Lock Installation

New lock installation in Bed-Stuy from $95 plus hardware. ANSI-graded deadbolts fitted to brownstone and apartment doors. Firm quote before work.

Licensed & Insured 20-Minute Response Non-Destructive Techniques Fair Pricing Guarantee

How Much Does Lock Installation Cost in Bed-Stuy?

New lock installation in Bed-Stuy starts at $95 plus the hardware you choose. We fit deadbolts, knob locks, mortise locksets, and smart locks across 11216, 11221, and 11233. Most jobs in and around Bed-Stuy get a 20–40 minute arrival, and we confirm the full price before we drill anything.


The quote you approve covers labor and hardware as one number. Every figure Locksmith Bed Stuy charges is listed on our locksmith pricing page, so you can check it before you call.


Deadbolt, Knob Lock, or Full Lockset — What Do You Need?

Most Bed-Stuy front doors need one good deadbolt above a working latch. The knob or lever lock keeps the door closed; the deadbolt is what actually resists force. If your door only has a knob lock, adding a Grade 2 deadbolt is the single most useful installation we do.


Apartment doors in walk-ups often add a Segal jimmy-proof deadbolt on the inside face. Street-level doors, garden entrances, and doors beside glass panels each call for different hardware. Tell us which door it is and we spec accordingly — not by upselling, but by matching the lock to the actual threat.


What Do ANSI Lock Grades Mean?

ANSI/BHMA grades rate how much force and wear a lock survives. Grade 1 is the strongest; Grade 3 is the minimum. The grade is printed on the packaging, and it matters more than the brand name on the front.


  • Grade 1: Commercial strength. Survives the most strike force and the most open-close cycles. Our pick for street-facing doors.
  • Grade 2: Strong residential hardware. The right balance of cost and strength for most apartment doors.
  • Grade 3: Basic builder-grade hardware. Acceptable on interior doors, not on your front entry.

  • We carry Grade 1 and Grade 2 deadbolts on the truck. When we quote a lock, we tell you its grade so you know exactly what you are paying for. A well-installed Grade 2 deadbolt beats a badly installed Grade 1 every day of the week — installation quality is half the security.


    Not on the doors that matter. NYC fire-safety rules do not allow double-cylinder deadbolts — locks that need a key on both sides — on the required exit doors of multiple dwellings. In a fire, nobody should have to hunt for a key to get out of their own home.


    Some locksmiths will install one anyway. We will not. We install a single-cylinder deadbolt with a reinforced strike plate instead. You get the same resistance against forced entry with none of the egress risk. Our NYC apartment lock laws guide covers the rules in plain English.


    Can You Fit a Modern Lock on a Brownstone Door?

    Yes, and it takes more care than a big-box install. Bed-Stuy brownstone doors from the 1890s–1930s are thicker than modern slabs, often warped, and usually carry an old mortise pocket. We bore new cross-holes cleanly, plug and refinish abandoned holes, and align the new bolt to a frame that has shifted for a century.


    If the door already has a working mortise lock or a Segal deadbolt worth saving, we say so. Lock repair is often cheaper than adding new hardware to a historic door.


    Why We Install 3-Inch Strike Screws

    Factory strike plates ship with short screws that bite only the thin jamb. We replace them with 3-inch screws that anchor into the framing stud behind it. Most forced entries defeat the jamb, not the lock — this small change is the cheapest real upgrade in the trade.



    Get an Expert Quote

    Transparent, flat-rate estimates for any project.



    Which Types of Locks Do You Install?

    We install the hardware that fits your door and your building's rules, not whatever is on sale.


  • Single-cylinder deadbolts, ANSI Grade 1 and 2
  • Mortise locksets for pre-war and brownstone doors
  • Segal jimmy-proof surface deadbolts, the classic Brooklyn apartment lock
  • High-security cylinders: Medeco, Mul-T-Lock, Abloy
  • Keypad and app-controlled locks — see smart lock installation
  • Storefront and office hardware — see commercial locksmith service

  • What Happens During an Installation Visit?


    Before we arrive

    You describe the door and what you want on the phone. We give you a from-price and a firm ETA. If you send a photo of the door edge, the quote gets tighter.


    At the door

    The technician measures the door, confirms the final price, and gets your OK before any tool touches wood. Installation of a standard deadbolt usually takes under an hour. Brownstone mortise work takes longer, and we tell you that up front.


    Before we leave

    We cycle the lock from both sides, check the strike alignment, and hand you every key. The door closes and locks the way it should, or we stay until it does. You can book an installation online or call (718) 568-6597 for same-day service.


    Do Landlords Have Lock Requirements in NYC?

    Yes. Owners of multiple dwellings must keep required locks on entrance and unit doors in working order, and the egress rule above applies to every required exit door. If you manage a building near the Nostrand Ave or Fulton St corridors, we handle unit turnovers, entrance-door hardware, and code-safe installations in one relationship — see our commercial locksmith service for buildings and storefronts.


    Tenants adding their own lock have rights too, with a duplicate-key obligation attached — the lock-laws guide linked above covers both sides. For help choosing apartment-door hardware before you buy, read the Brooklyn apartment security guide.

    Request Technical Quote

    Transparent, professional estimation for your Lock Installation needs.

    Lock Installation Experts | Locksmith Bed Stuy